- +91 9024156475
- info@zinbal.com
Showing 81–100 of 131 results
- A motorized creative toolkit to enjoy the models in motion
- A do it yourself kit which allows to make 8 different motorized models one at a time
- An engineering system to introduce STEM and bring out the creativity in your child
- These parts can be used over and over again to create 14 and many more models as far as your kidâ??s imagination flies
- 166 pieces crafted from high quality steel and finished perfectly for the ideal feel and finish
- If your child is new to building kits then the detailed and illustrated guide of the 14 model engineering building kit will help them
- Teaches and improves fine motor skills logical thinking and creative thinking
Power supply: 3.3V or 5.5V
Sensitivity: adjustable
Sensor Type: analog and digital output
Dimensions 34 x 16mm
Plastic Parts Material ABS
Mounting Holes M2
Maximum Operating Current (A) 3 – 5
Allowed Wire Size (AWG) 29 ~ 20
Dimensions 46mmx36mm
Operating Voltage : 3 ~ 6V
Operating Current: 130 ~ 220mA
Flow Rate : 80 ~ 120 L/H
Maximum Lift : 40 ~ 110 mm
Continuous Working Life : 500 hours
Up to 480 Mbps data transfer rate.
USB Type: Type-A to Mini-B.
Exclusively designed for Arduino boards.
- The drift car uses a four-wheel drive device as the power system, plus TPR anti-skid wear-resistant tires, making it easy to display 360 rolling drift.
- The car can still keep running when it flip over to its back, free to drive on both sides, running is endless, so is RC fun One-click demonstration: when press the button, the car automatically present all actions including forward/backward/right/left and deformation.
- The car is able to convert and twist automatically from a flat shape to a off-road car with the button on controller, then the car body will be bowing and four wheels grab the ground more tightly and steadily. Racing or climbing, just your choice.
- Kids can either drive this monster truck low and steady for smooth surfaces or raise the chassis to deal with all kinds of obstacles/ terrain. With just the press of the function button, the stunt car will automatically convert.
High quality off-road vehicle quality High quality professional off-road anti-vibration system, high imitation rubber tire with an irregular concave surface, can provide firm grip; bottom with direction rotator, can automatically adjust the car without going straight, whether it is land, Beaches, meadows, or rugged rocky mountain roads.
Four-wheel drive, twin-engine power 4WD and four-wheel motor drive install independent suspension springs to make the off-road body more flexible, play a shock-proof function, cushion the impact force transmitted by the uneven road to the frame or the body, and attenuate the resulting shock.
Long-distance remote control and large-capacity battery Long-distance remote control and large-capacity battery: remote control over 80 meters, 2.4Ghz can support multiple cars at the same time; equipped with 4.8V 700mAh rechargeable battery; charging time is about 2 hours, can provide 15-20 minutes of driving time.
Full-featured remote control Forward/backward/left/right.The remote control supports multiple simultaneous plays, and does not interfere with each other, the powerful stunts on the skateboard and pedal. Remote control off-road racing and drifting.
Operating Voltage: 5 Volt
Preheat Duration:20 s
Output: Both digital and analog
The Sensitivity of Digital pin can be varied using the potentiometer
Operating Voltage: 5 Volt
Preheat Duration:20 s
Output: Both digital and analog
The Sensitivity of Digital pin can be varied using the potentiometer
Operating Voltage: 5 Volt
Preheat Duration:20 s
Output: Both digital and analog
The Sensitivity of Digital pin can be varied using the potentiometer
Operating Voltage: 5 Volt
Preheat Duration:20 s
Output: Both digital and analog
The Sensitivity of Digital pin can be varied using the potentiometer
Operating Voltage: 5 Volt
Preheat Duration:20 s
Output: Both digital and analog
The Sensitivity of Digital pin can be varied using the potentiometer
Operating Voltage: 5 Volt
Preheat Duration:20 s
Output: Both digital and analog
The Sensitivity of the Digital pin can be varied using the potentiometer
Operating Voltage: 5 Volt
Preheat Duration:20 s
Output: Both digital and analog
The Sensitivity of Digital pin can be varied using the potentiometer
Operating Voltage: 5 Volt
Preheat Duration:20 s
Output: Both digital and analog
The Sensitivity of Digital pin can be varied using the potentiometer
Zero PCB is a standard cause revealed circuit board (PCB) called DOT PCB. This is a thin, rigid copper plate with pre-drilled holes at standard intervals on a grid with 2.54 mm (0.1 inch) spacing among holes.
Technical Specs
Dimension: 50 × 75mm
Copper Thickness 1-4 OZ
Board Thickness 0.7-1.2mm
Min. Hole Size 0.3mm
PCB colour: Brown
Receiver Type 50 Channels
GPS L1 frequency, C/A Code
SBAS: WAAS, EGNOS, MSAS
Input Supply Voltage: 2.7 ~ 6 VDC
Main Chip: NEO-6
Navigation Update Rate 5Hz
Position Accuracy: 2Meter
Operating Temperature Range: -24 to 84 °C
Tracking Sensitivity: -161 dBm
Avg Cold Start Time: 27s
Warm Start Time: 27s
Maximum Speed: 500 M/s
Drive Type: Dual high-power H-bridge
Power Input: 4.5 to 9V
Communication Interface Voltage: 3.3V
Flash size: 4MB
Operating Temperature: -40 to 125°C
Transfer Rate: 110 to 460800Kbps
AD0: 1 channel ADC
Input Voltage(Max.) : 3V-12V
Resistance: 120KΩ to 300MΩ
External Material: Plastic;
Color: Black
Input voltage: 4 V to 12 V (+ 5 V recommended)
Output: Digital Signal
Working range: 120° Angle and up to 7 meter
Able to work at low current (65mA)
Favorable temperature -20 ° to + 80 ° Celsius
Zinbal EdTech Private Limited
S4, Sector 5, Pratap Nagar, Sanganer, Jaipur, Rajasthan 302033
Copyright © 2023, All Rights Reserved. | Zinbal EdTech Pvt. Ltd.