- +91 9024156475
- info@zinbal.com
Showing 1–20 of 23 results
Specific Uses For Product: Electronic
Power Source: 230v ac
Wattage: 25 Watts
Number of Items: 31
Material: Plastic, Metal
Colour: Clear,Yellow
Recommended Uses For Product: PC,Furniture,Automotive,Appliance,Household,Game Console,Electronic Devices
Special Feature: Ergonomic, Magnetic Tip
1 channel relay board
Operating voltage 5V
Maximum current: 20mA
Relay contact current capacity at AC250V: 10A
Relay contact current capacity DC5V: 10A
Power indicator light
Control Indicator light
Trigger input voltage 3.3V – 5V
Two separate LEDs to indicate relay on/off
Back EMF Protection
Two LEDs to indicate when the relay is on.
Works with logic level signals from 3.3V or 5V devices
Module with diode current protection, short response time
AC control voltage: 250V at max 10A
DC control voltage: 30V at max 10A
High-temperature capability
Highly efficient for de-soldering purposes
This quality product has exceptional desoldering ability due to strong suction and durable build.
Working voltage: DC 4.8-6V
Provides 3 modes to check servos and ESCs
You can adjust the knob to different speeds and check the response time in manual mode.
In neutral mode, the servo returns to the neutral point.
Automatic "window wiper" mode causes the servo to rotate through the widest possible angle like a window wiper.
Connect up to 3 servos simultaneously
Digital Multimeter with 1M Ohm Impedance is Standard Diagnostic Tool to Measure Two or More Electrical Values Such as Voltage, Current and Resistance. It uses digital and logic technology using integrated circuit technology to offer additional test capabilities.
They are Widely Used in electrical measurements, AC and DC voltage, AC and DC current, and resistance, voltmeter, ammeter, and ohmmeter, voltages and voltage fluctuations in homes or offices.
The HC-05 6 Pin Wireless Serial Bluetooth Module is a Bluetooth module to be used with any microcontroller. It uses the UART protocol to simplify sending and receiving wireless data.
Operating voltage: 3.6 ~ 6V.
Input current: 50mA
Maximum Operating Range: 10m.
Operating Frequency: 2.4GHz ISM band.
Modulation: GFSK (Gaussian Frequency Shift Keying).
Operating Temperature: -20 ~ +75℃.
Colour: Yellow
Style: Wire Collated
Item Weight: 320 Grams
Specific Uses For Product: Art and Craft , DIY Projects, Schools,Industries, For Bonding,Adhesive
Material: EVA, Resin
Compatible Material: Gemstone, Wood, Cardboard, Plastic, Fabric
Item Form: Stick
Input Supply Voltage: 2.5 ~ 5.5(VDC)
Transmission Distance: 45 m
Carrier Frequency: 38 kHz
Beam Angle: 45 deg
Viewing Angle: 45 deg
Output Current: 5 mA
Power Dissipation: 10 mW
Can Measure 200m VDC - 600 VDC
Can measure 200 VAC - 600 VAC
Can measure Resistance from 200 ohm - 2M ohm
Can measure DC current from 200 UA - 10 A
Can be used to measure connectivity with two leads through Indicator buzzer.
Can be used to measure Frequency.
Can measure Diode
Transistor Measurement
Has HOLD button through which you can hold on LCD displays the current measurement value, press thus button again to exit data hold display function
Receiver Type 50 Channels
GPS L1 frequency, C/A Code
SBAS: WAAS, EGNOS, MSAS
Input Supply Voltage: 2.7 ~ 6 VDC
Main Chip: NEO-6
Navigation Update Rate 5Hz
Position Accuracy: 2Meter
Operating Temperature Range: -24 to 84 °C
Tracking Sensitivity: -161 dBm
Avg Cold Start Time: 27s
Warm Start Time: 27s
Maximum Speed: 500 M/s
Drive Type: Dual high-power H-bridge
Power Input: 4.5 to 9V
Communication Interface Voltage: 3.3V
Flash size: 4MB
Operating Temperature: -40 to 125°C
Transfer Rate: 110 to 460800Kbps
AD0: 1 channel ADC
Operating voltage: 5V.
Quiescent Current: 4mA.
Receiving frequency: 315MHz.
Receiver sensitivity: 105 dB.
Communication Distance (m): 20 ~ 200 meters.
TTL serial port for serial port, you can link directly to the micro-controller.
Power module automatically boots, homing network.
Onboard signal lights all the way.
It flashes slowly when there is a signal, it flashes quickly when there is no signal.
Operating Voltage : 3.7 ~ 4.2VDC
Peak Current : 2A
Brand: Quickfix
Weight:-15g
Increases the flow of molten solder, you can easily clean the board.
Suitable for PCB and SMD reworking.
Name: Solder Wire
Wire Diameter: 1.0mm
60/40 Tin/Lead Solder Wire
Flux: 2%
SWG: 20/22
Net Weight: 50g
Model: Ruler
Length: 12″
Graduations: 1mm
Tool Body Material: Stainless Steel
Brand: TAPARIA
Material: Chromium-Vanadium Steel
Item Dimensions LxWxH: 125 x 47 x 9.5 Centimeters
Colour: Silver/Red
Handle Material: Alloy Steel
Zinbal EdTech Private Limited
S4, Sector 5, Pratap Nagar, Sanganer, Jaipur, Rajasthan 302033
Copyright © 2023, All Rights Reserved. | Zinbal EdTech Pvt. Ltd.