- +91 9024156475
- info@zinbal.com
Showing all 15 results
The operating voltage of this LCD is 4.7V-5.3V
It includes two rows where each row can produce 16-characters.
The utilization of current is 1mA with no backlight
Every character can be built with a 5×8 pixel box
Its display can work on two modes like 4-bit & 8-bit
These are obtainable in Blue & Green Backlight
Model: ICR 18650
Voltage: 3.6V
Current: 2A (25℃)
Battery cell type: (8C)
Space for a standard 18650 batteries.
Cable length: 15cm.
Output: 3.7V
Dimensions (approx.): 76 x 20 x 20mm
Weight: 6g
high-quality plastic material
Space for two standard 18650 batteries.
Cable length: 15cm.
Output: 7.2V
Dimensions (approx.): 76 x 40 x 20mm
Weight: 12g
high-quality plastic material
Number of Digits 4 digits
Driver Chip TM1637
Communication Interface I2C Bus
Control Pins 2 connections (CLK and DIO)
Supply Voltage Typically 5V DC (Check specific module for voltage range)
Low current operation
Better, brighter and larger display than conventional LCD displays.
Current consumption : 30mA / segment
Peak current : 70mA
9V output
metal jacket body
Excellent finish quality prevents leakage
Easy to install and replace
Corrosion-free connection points for long-term use
Mercury and cadmium 0%. Environmentally Friendly
Plug Type: 5.5 x 2.1mm
Pin: 3
Temperature: -30°C ~ +70°C.
Rated load: up to DC 30V / 1.0A.
The HC-05 6 Pin Wireless Serial Bluetooth Module is a Bluetooth module to be used with any microcontroller. It uses the UART protocol to simplify sending and receiving wireless data.
Operating voltage: 3.6 ~ 6V.
Input current: 50mA
Maximum Operating Range: 10m.
Operating Frequency: 2.4GHz ISM band.
Modulation: GFSK (Gaussian Frequency Shift Keying).
Operating Temperature: -20 ~ +75℃.
Input Supply Voltage: 2.5 ~ 5.5(VDC)
Transmission Distance: 45 m
Carrier Frequency: 38 kHz
Beam Angle: 45 deg
Viewing Angle: 45 deg
Output Current: 5 mA
Power Dissipation: 10 mW
Input Voltage: 3.7 to 5.3 V
Input Current : 320 mA
Driver Chip : MAX7219
Emitted color : Red
Display Dimensions : 32x32x6 (LxWxH) mm
PCB Dimensions : 50×32 (LxW) mm
Receiver Type 50 Channels
GPS L1 frequency, C/A Code
SBAS: WAAS, EGNOS, MSAS
Input Supply Voltage: 2.7 ~ 6 VDC
Main Chip: NEO-6
Navigation Update Rate 5Hz
Position Accuracy: 2Meter
Operating Temperature Range: -24 to 84 °C
Tracking Sensitivity: -161 dBm
Avg Cold Start Time: 27s
Warm Start Time: 27s
Maximum Speed: 500 M/s
Drive Type: Dual high-power H-bridge
Power Input: 4.5 to 9V
Communication Interface Voltage: 3.3V
Flash size: 4MB
Operating Temperature: -40 to 125°C
Transfer Rate: 110 to 460800Kbps
AD0: 1 channel ADC
Operating voltage: 5V.
Quiescent Current: 4mA.
Receiving frequency: 315MHz.
Receiver sensitivity: 105 dB.
Communication Distance (m): 20 ~ 200 meters.
TTL serial port for serial port, you can link directly to the micro-controller.
Power module automatically boots, homing network.
Onboard signal lights all the way.
It flashes slowly when there is a signal, it flashes quickly when there is no signal.
Operating Voltage : 3.7 ~ 4.2VDC
Peak Current : 2A
Zinbal EdTech Private Limited
S4, Sector 5, Pratap Nagar, Sanganer, Jaipur, Rajasthan 302033
Copyright © 2023, All Rights Reserved. | Zinbal EdTech Pvt. Ltd.