- +91 9024156475
- info@zinbal.com
Showing 1–20 of 30 results
The operating voltage of this LCD is 4.7V-5.3V
It includes two rows where each row can produce 16-characters.
The utilization of current is 1mA with no backlight
Every character can be built with a 5×8 pixel box
Its display can work on two modes like 4-bit & 8-bit
These are obtainable in Blue & Green Backlight
Number of Digits 4 digits
Driver Chip TM1637
Communication Interface I2C Bus
Control Pins 2 connections (CLK and DIO)
Supply Voltage Typically 5V DC (Check specific module for voltage range)
Size: 5mm
Color: Blue
Head Shape: Round
Lens Appearance: Transparent
Size: 5mm
Color: Green
Head Shape: Round
Lens Appearance: Transparent
Size: 5mm
Color: Red
Head Shape: Round
Lens Appearance: Transparent
Forward current : 20mA
Peak Forward current : 30mA
Operating Temp. : -25 ~ 75C
Number of pins: 4
Mounting type: Through hole
Size: 5mm
Color: White
Head Shape: Round
Lens Appearance: Transparent
Size: 5mm
Color: Yellow
Head Shape: Round
Lens Appearance: Transparent
1 channel relay board
Operating voltage 5V
Maximum current: 20mA
Relay contact current capacity at AC250V: 10A
Relay contact current capacity DC5V: 10A
Power indicator light
Control Indicator light
Trigger input voltage 3.3V – 5V
Two separate LEDs to indicate relay on/off
Back EMF Protection
Two LEDs to indicate when the relay is on.
Works with logic level signals from 3.3V or 5V devices
Module with diode current protection, short response time
AC control voltage: 250V at max 10A
DC control voltage: 30V at max 10A
Input Voltage(Max.) : 5V
Resistance: 120KΩ to 300MΩ
Body Size : 12 x 9.5mm
Pin Pitch: 6mm
External Material: Plastic;
Color: Black
Low current operation
Better, brighter and larger display than conventional LCD displays.
Current consumption : 30mA / segment
Peak current : 70mA
Output current maximum 1A
Output voltage 5, 9, 12
thermal overload protection
short circuit protection
Protection of the safe operating range of the output transistor
Output current maximum 1A
Output voltage 5, 9, 12
thermal overload protection
short circuit protection
Protection of the safe operating range of the output transistor
Output current maximum 1A
Output voltage 5, 9, 12
thermal overload protection
short circuit protection
Protection of the safe operating range of the output transistor
Working voltage: DC 4.8-6V
Provides 3 modes to check servos and ESCs
You can adjust the knob to different speeds and check the response time in manual mode.
In neutral mode, the servo returns to the neutral point.
Automatic "window wiper" mode causes the servo to rotate through the widest possible angle like a window wiper.
Connect up to 3 servos simultaneously
The HC-05 6 Pin Wireless Serial Bluetooth Module is a Bluetooth module to be used with any microcontroller. It uses the UART protocol to simplify sending and receiving wireless data.
Operating voltage: 3.6 ~ 6V.
Input current: 50mA
Maximum Operating Range: 10m.
Operating Frequency: 2.4GHz ISM band.
Modulation: GFSK (Gaussian Frequency Shift Keying).
Operating Temperature: -20 ~ +75℃.
Input Supply Voltage: 2.5 ~ 5.5(VDC)
Transmission Distance: 45 m
Carrier Frequency: 38 kHz
Beam Angle: 45 deg
Viewing Angle: 45 deg
Output Current: 5 mA
Power Dissipation: 10 mW
Input Voltage: 3.7 to 5.3 V
Input Current : 320 mA
Driver Chip : MAX7219
Emitted color : Red
Display Dimensions : 32x32x6 (LxWxH) mm
PCB Dimensions : 50×32 (LxW) mm
- The drift car uses a four-wheel drive device as the power system, plus TPR anti-skid wear-resistant tires, making it easy to display 360 rolling drift.
- The car can still keep running when it flip over to its back, free to drive on both sides, running is endless, so is RC fun One-click demonstration: when press the button, the car automatically present all actions including forward/backward/right/left and deformation.
- The car is able to convert and twist automatically from a flat shape to a off-road car with the button on controller, then the car body will be bowing and four wheels grab the ground more tightly and steadily. Racing or climbing, just your choice.
- Kids can either drive this monster truck low and steady for smooth surfaces or raise the chassis to deal with all kinds of obstacles/ terrain. With just the press of the function button, the stunt car will automatically convert.
Zinbal EdTech Private Limited
S4, Sector 5, Pratap Nagar, Sanganer, Jaipur, Rajasthan 302033
Copyright © 2023, All Rights Reserved. | Zinbal EdTech Pvt. Ltd.