- +91 9024156475
- info@zinbal.com
Showing 1–20 of 33 results
The range of operating voltage is 3 to 5 V
Output: Both Digital & Analog Signal
The sensitivity of the microphone (1kHz) is 52 to 48 dB
Operate on Low Power
Connection Interface: I2C
operating voltage 2.5 ~ 3.6 V
12 sensing inputs
Auto calibration of each sensor
Operating Voltage: 2.5V-5.5V
Startup Calibration Delay: 0.5 Sec
Current Consumption: < 7 µA
Simple, easy to use, with Auto Calibration
Power: 2.7V to 5.5V
Interface: digital TTL
High-resolution conversion of light intensity to frequency
Programmable color and full-scale output frequency
Communicates directly to microcontroller
Operating Voltage: 3.5V to 5.5V
Operating current: 0.3mA
Output: Serial data
Temperature Range: 0°C to 50°C
Humidity Range: 20% to 90%
Accuracy: ±1°C and ±1%
LM393-based design.
Sensitivity adjustable (potentiometer adjustment).
Operating voltage: 3.3V to 5V DC.
Operating current: 15mA.
Module pin 3 pins.
The output type is digital output (D0).
Size : 2.2inch
Operating voltage : 0-5V
Can operate on LOW voltages
Operating temperature: -45ºC to +80ºC
Flat Resistance: 25K Ω
Resistance Tolerance: ±30%
Actuation force as low as 0.2N
Sensitivity ranges up to 20N
Cost-effective
Ultra-thin
Operating temperature: -40ºC to +85ºC
None actuated Resistance: 10M Ω
Resistance Range: 100K to 1K Ohms (depending on force)
Optimal Sensing Distance: 3mm
Max. Recommended Sensing Distance: 6mm
Distance between two IR sensors: 15mm
PCB Size ( L x W ) : 126 x 26mm
Input voltage: 4 V to 12 V (+ 5 V recommended)
Output: Digital Signal
Working range: up to 20 cm away
Able to work at low current (20mA)
Directional movements are simply two potentiometers - one for each axis
Compatible with Arduino interface
The biaxial XY Joystick Module KY-023 applies ARDUINO
Dimensions: 1.57 in x 1.02 in x 1.26 in (4.0 cm x 2.6 cm x 3.2 cm)
5 Pin
Power supply: 3.3V or 5.5V
Sensitivity: adjustable
Sensor Type: analog and digital output
Dimensions 34 x 16mm
- The drift car uses a four-wheel drive device as the power system, plus TPR anti-skid wear-resistant tires, making it easy to display 360 rolling drift.
- The car can still keep running when it flip over to its back, free to drive on both sides, running is endless, so is RC fun One-click demonstration: when press the button, the car automatically present all actions including forward/backward/right/left and deformation.
- The car is able to convert and twist automatically from a flat shape to a off-road car with the button on controller, then the car body will be bowing and four wheels grab the ground more tightly and steadily. Racing or climbing, just your choice.
- Kids can either drive this monster truck low and steady for smooth surfaces or raise the chassis to deal with all kinds of obstacles/ terrain. With just the press of the function button, the stunt car will automatically convert.
High quality off-road vehicle quality High quality professional off-road anti-vibration system, high imitation rubber tire with an irregular concave surface, can provide firm grip; bottom with direction rotator, can automatically adjust the car without going straight, whether it is land, Beaches, meadows, or rugged rocky mountain roads.
Four-wheel drive, twin-engine power 4WD and four-wheel motor drive install independent suspension springs to make the off-road body more flexible, play a shock-proof function, cushion the impact force transmitted by the uneven road to the frame or the body, and attenuate the resulting shock.
Long-distance remote control and large-capacity battery Long-distance remote control and large-capacity battery: remote control over 80 meters, 2.4Ghz can support multiple cars at the same time; equipped with 4.8V 700mAh rechargeable battery; charging time is about 2 hours, can provide 15-20 minutes of driving time.
Full-featured remote control Forward/backward/left/right.The remote control supports multiple simultaneous plays, and does not interfere with each other, the powerful stunts on the skateboard and pedal. Remote control off-road racing and drifting.
Operating Voltage: 5 Volt
Preheat Duration:20 s
Output: Both digital and analog
The Sensitivity of Digital pin can be varied using the potentiometer
Operating Voltage: 5 Volt
Preheat Duration:20 s
Output: Both digital and analog
The Sensitivity of Digital pin can be varied using the potentiometer
Operating Voltage: 5 Volt
Preheat Duration:20 s
Output: Both digital and analog
The Sensitivity of Digital pin can be varied using the potentiometer
Operating Voltage: 5 Volt
Preheat Duration:20 s
Output: Both digital and analog
The Sensitivity of Digital pin can be varied using the potentiometer
Operating Voltage: 5 Volt
Preheat Duration:20 s
Output: Both digital and analog
The Sensitivity of Digital pin can be varied using the potentiometer
Operating Voltage: 5 Volt
Preheat Duration:20 s
Output: Both digital and analog
The Sensitivity of the Digital pin can be varied using the potentiometer
Zinbal EdTech Private Limited
S4, Sector 5, Pratap Nagar, Sanganer, Jaipur, Rajasthan 302033
Copyright © 2023, All Rights Reserved. | Zinbal EdTech Pvt. Ltd.