- +91 9024156475
- info@zinbal.com
Showing all 20 results
Size: 5mm
Color: Blue
Head Shape: Round
Lens Appearance: Transparent
Size: 5mm
Color: Green
Head Shape: Round
Lens Appearance: Transparent
Size: 5mm
Color: Red
Head Shape: Round
Lens Appearance: Transparent
Forward current : 20mA
Peak Forward current : 30mA
Operating Temp. : -25 ~ 75C
Number of pins: 4
Mounting type: Through hole
Size: 5mm
Color: White
Head Shape: Round
Lens Appearance: Transparent
Size: 5mm
Color: Yellow
Head Shape: Round
Lens Appearance: Transparent
1 channel relay board
Operating voltage 5V
Maximum current: 20mA
Relay contact current capacity at AC250V: 10A
Relay contact current capacity DC5V: 10A
Power indicator light
Control Indicator light
Trigger input voltage 3.3V – 5V
Two separate LEDs to indicate relay on/off
Back EMF Protection
Two LEDs to indicate when the relay is on.
Works with logic level signals from 3.3V or 5V devices
Module with diode current protection, short response time
AC control voltage: 250V at max 10A
DC control voltage: 30V at max 10A
Input Voltage(Max.) : 5V
Resistance: 120KΩ to 300MΩ
Body Size : 12 x 9.5mm
Pin Pitch: 6mm
External Material: Plastic;
Color: Black
Output current maximum 1A
Output voltage 5, 9, 12
thermal overload protection
short circuit protection
Protection of the safe operating range of the output transistor
Output current maximum 1A
Output voltage 5, 9, 12
thermal overload protection
short circuit protection
Protection of the safe operating range of the output transistor
Output current maximum 1A
Output voltage 5, 9, 12
thermal overload protection
short circuit protection
Protection of the safe operating range of the output transistor
Microcontroller: ATmega2560
Operating Voltage: 5V
Input Voltage : 7-12V
Digital I/O Pins: 54 (of which 15 provide PWM output)
Analog Input Pins: 16
DC Current per I/O Pin: 20 mA
DC Current for 3.3V Pin: 50 mA
Flash Memory: 256 KB
SRAM: 8 KB
EEPROM: 4 KB
Clock Speed: 16 MHz
Microcontroller: ATmega328P
Digital I/O Pins: 14, with 6 PWM outputs
Analog Input Pins: 8
Operating Voltage: 5V
Clock Speed: 16MHz
USB Connection
Power Jack
Reset Button
Microcontroller: ATmega328P
Operating Voltage: 5V
Input Voltage (recommended): 7-12V
Digital I/O Pins: 14, of which 6 can be used as PWM outputs
Analog Input Pins: 61
DC Current per I/O Pin: 20mA
DC Current for 3.3V Pin: 50mA
Flash Memory: 32KB (ATmega328P), 0.5KB used by bootloader
SRAM: 2KB (ATmega328P)
EEPROM: 1KB (ATmega328P)
Clock Speed: 16 MHz
Reset Button
Working voltage: DC 4.8-6V
Provides 3 modes to check servos and ESCs
You can adjust the knob to different speeds and check the response time in manual mode.
In neutral mode, the servo returns to the neutral point.
Automatic "window wiper" mode causes the servo to rotate through the widest possible angle like a window wiper.
Connect up to 3 servos simultaneously
Drive Type: Dual high-power H-bridge
Power Input: 4.5 to 9V
Communication Interface Voltage: 3.3V
Flash size: 4MB
Operating Temperature: -40 to 125°C
Transfer Rate: 110 to 460800Kbps
AD0: 1 channel ADC
Input Voltage(Max.) : 3V-12V
Resistance: 120KΩ to 300MΩ
External Material: Plastic;
Color: Black
Product: BC547 Transistor
Polarity: NPN
Number of pins: 3
package: TO-92
Mounting type: Through hole
Product: BC557 Transistor
Polarity: PNP
Number of pins: 3
package: TO-92
Mounting type: Through hole
Zinbal EdTech Private Limited
S4, Sector 5, Pratap Nagar, Sanganer, Jaipur, Rajasthan 302033
Copyright © 2023, All Rights Reserved. | Zinbal EdTech Pvt. Ltd.