Filter Products

Showing all 7 results

46%
5V 1 Channel Relay Module

5V 1 Channel Relay Module

Original price was: ₹68.00.Current price is: ₹37.00. Add to cart
1 channel relay board Operating voltage 5V Maximum current: 20mA Relay contact current capacity at AC250V: 10A Relay contact current capacity DC5V: 10A Power indicator light Control Indicator light
47%
5V 2 Channel Relay Module

5V 2 Channel Relay Module

Original price was: ₹132.00.Current price is: ₹71.00. Add to cart
Trigger input voltage 3.3V – 5V Two separate LEDs to indicate relay on/off Back EMF Protection Two LEDs to indicate when the relay is on. Works with logic level signals from 3.3V or 5V devices Module with diode current protection, short response time AC control voltage: 250V at max 10A DC control voltage: 30V at max 10A
47%
Arduino Mega

Arduino Mega

Original price was: ₹2,124.00.Current price is: ₹1,133.00. Add to cart
Microcontroller: ATmega2560 Operating Voltage: 5V Input Voltage : 7-12V Digital I/O Pins: 54 (of which 15 provide PWM output) Analog Input Pins: 16 DC Current per I/O Pin: 20 mA DC Current for 3.3V Pin: 50 mA Flash Memory: 256 KB SRAM: 8 KB EEPROM: 4 KB Clock Speed: 16 MHz
47%
Arduino Nano

Arduino Nano

Original price was: ₹625.00.Current price is: ₹334.00. Add to cart
Microcontroller: ATmega328P Digital I/O Pins: 14, with 6 PWM outputs Analog Input Pins: 8 Operating Voltage: 5V Clock Speed: 16MHz USB Connection Power Jack Reset Button
47%
Arduino Uno R3 SMD

Arduino Uno R3 SMD

Original price was: ₹649.00.Current price is: ₹347.00. Add to cart
Microcontroller: ATmega328P Operating Voltage: 5V Input Voltage (recommended): 7-12V Digital I/O Pins: 14, of which 6 can be used as PWM outputs Analog Input Pins: 61 DC Current per I/O Pin: 20mA DC Current for 3.3V Pin: 50mA Flash Memory: 32KB (ATmega328P), 0.5KB used by bootloader SRAM: 2KB (ATmega328P) EEPROM: 1KB (ATmega328P) Clock Speed: 16 MHz Reset Button
47%
Digital Multi Servo Tester ESC

Digital Multi Servo Tester ESC

Original price was: ₹217.00.Current price is: ₹116.00. Add to cart
Working voltage: DC 4.8-6V Provides 3 modes to check servos and ESCs You can adjust the knob to different speeds and check the response time in manual mode. In neutral mode, the servo returns to the neutral point. Automatic "window wiper" mode causes the servo to rotate through the widest possible angle like a window wiper. Connect up to 3 servos simultaneously
47%
Node MCU(ESP8266)

Node MCU(ESP8266)

Original price was: ₹413.00.Current price is: ₹220.00. Add to cart
Drive Type: Dual high-power H-bridge Power Input: 4.5 to 9V Communication Interface Voltage: 3.3V Flash size: 4MB Operating Temperature: -40 to 125°C Transfer Rate: 110 to 460800Kbps AD0: 1 channel ADC

Filter Products

Product Categories

Filter by price

Product Status

Do you have any query?

Contact
FAQs

Copyright © 2023, All Rights Reserved. | Zinbal EdTech Pvt. Ltd.