- +91 9024156475
- info@zinbal.com
Showing all 12 results
The operating voltage of this LCD is 4.7V-5.3V
It includes two rows where each row can produce 16-characters.
The utilization of current is 1mA with no backlight
Every character can be built with a 5×8 pixel box
Its display can work on two modes like 4-bit & 8-bit
These are obtainable in Blue & Green Backlight
Model: ICR 18650
Voltage: 3.6V
Current: 2A (25℃)
Battery cell type: (8C)
Space for a standard 18650 batteries.
Cable length: 15cm.
Output: 3.7V
Dimensions (approx.): 76 x 20 x 20mm
Weight: 6g
high-quality plastic material
Space for two standard 18650 batteries.
Cable length: 15cm.
Output: 7.2V
Dimensions (approx.): 76 x 40 x 20mm
Weight: 12g
high-quality plastic material
Number of Digits 4 digits
Driver Chip TM1637
Communication Interface I2C Bus
Control Pins 2 connections (CLK and DIO)
Supply Voltage Typically 5V DC (Check specific module for voltage range)
1 channel relay board
Operating voltage 5V
Maximum current: 20mA
Relay contact current capacity at AC250V: 10A
Relay contact current capacity DC5V: 10A
Power indicator light
Control Indicator light
Trigger input voltage 3.3V – 5V
Two separate LEDs to indicate relay on/off
Back EMF Protection
Two LEDs to indicate when the relay is on.
Works with logic level signals from 3.3V or 5V devices
Module with diode current protection, short response time
AC control voltage: 250V at max 10A
DC control voltage: 30V at max 10A
Low current operation
Better, brighter and larger display than conventional LCD displays.
Current consumption : 30mA / segment
Peak current : 70mA
9V output
metal jacket body
Excellent finish quality prevents leakage
Easy to install and replace
Corrosion-free connection points for long-term use
Mercury and cadmium 0%. Environmentally Friendly
Plug Type: 5.5 x 2.1mm
Pin: 3
Temperature: -30°C ~ +70°C.
Rated load: up to DC 30V / 1.0A.
Working voltage: DC 4.8-6V
Provides 3 modes to check servos and ESCs
You can adjust the knob to different speeds and check the response time in manual mode.
In neutral mode, the servo returns to the neutral point.
Automatic "window wiper" mode causes the servo to rotate through the widest possible angle like a window wiper.
Connect up to 3 servos simultaneously
Input Voltage: 3.7 to 5.3 V
Input Current : 320 mA
Driver Chip : MAX7219
Emitted color : Red
Display Dimensions : 32x32x6 (LxWxH) mm
PCB Dimensions : 50×32 (LxW) mm
Zinbal EdTech Private Limited
S4, Sector 5, Pratap Nagar, Sanganer, Jaipur, Rajasthan 302033
Copyright © 2023, All Rights Reserved. | Zinbal EdTech Pvt. Ltd.