- +91 9024156475
- info@zinbal.com
Showing 1–20 of 45 results
Size: 5mm
Color: Blue
Head Shape: Round
Lens Appearance: Transparent
Size: 5mm
Color: Green
Head Shape: Round
Lens Appearance: Transparent
Size: 5mm
Color: Red
Head Shape: Round
Lens Appearance: Transparent
Forward current : 20mA
Peak Forward current : 30mA
Operating Temp. : -25 ~ 75C
Number of pins: 4
Mounting type: Through hole
Size: 5mm
Color: White
Head Shape: Round
Lens Appearance: Transparent
Size: 5mm
Color: Yellow
Head Shape: Round
Lens Appearance: Transparent
1 channel relay board
Operating voltage 5V
Maximum current: 20mA
Relay contact current capacity at AC250V: 10A
Relay contact current capacity DC5V: 10A
Power indicator light
Control Indicator light
Trigger input voltage 3.3V – 5V
Two separate LEDs to indicate relay on/off
Back EMF Protection
Two LEDs to indicate when the relay is on.
Works with logic level signals from 3.3V or 5V devices
Module with diode current protection, short response time
AC control voltage: 250V at max 10A
DC control voltage: 30V at max 10A
Input Voltage(Max.) : 5V
Resistance: 120KΩ to 300MΩ
Body Size : 12 x 9.5mm
Pin Pitch: 6mm
External Material: Plastic;
Color: Black
Output current maximum 1A
Output voltage 5, 9, 12
thermal overload protection
short circuit protection
Protection of the safe operating range of the output transistor
Output current maximum 1A
Output voltage 5, 9, 12
thermal overload protection
short circuit protection
Protection of the safe operating range of the output transistor
Output current maximum 1A
Output voltage 5, 9, 12
thermal overload protection
short circuit protection
Protection of the safe operating range of the output transistor
The range of operating voltage is 3 to 5 V
Output: Both Digital & Analog Signal
The sensitivity of the microphone (1kHz) is 52 to 48 dB
Operate on Low Power
Connection Interface: I2C
operating voltage 2.5 ~ 3.6 V
12 sensing inputs
Auto calibration of each sensor
Operating Voltage: 2.5V-5.5V
Startup Calibration Delay: 0.5 Sec
Current Consumption: < 7 µA
Simple, easy to use, with Auto Calibration
Power: 2.7V to 5.5V
Interface: digital TTL
High-resolution conversion of light intensity to frequency
Programmable color and full-scale output frequency
Communicates directly to microcontroller
Operating Voltage: 3.5V to 5.5V
Operating current: 0.3mA
Output: Serial data
Temperature Range: 0°C to 50°C
Humidity Range: 20% to 90%
Accuracy: ±1°C and ±1%
LM393-based design.
Sensitivity adjustable (potentiometer adjustment).
Operating voltage: 3.3V to 5V DC.
Operating current: 15mA.
Module pin 3 pins.
The output type is digital output (D0).
Working voltage: DC 4.8-6V
Provides 3 modes to check servos and ESCs
You can adjust the knob to different speeds and check the response time in manual mode.
In neutral mode, the servo returns to the neutral point.
Automatic "window wiper" mode causes the servo to rotate through the widest possible angle like a window wiper.
Connect up to 3 servos simultaneously
Size : 2.2inch
Operating voltage : 0-5V
Can operate on LOW voltages
Operating temperature: -45ºC to +80ºC
Flat Resistance: 25K Ω
Resistance Tolerance: ±30%
Zinbal EdTech Private Limited
S4, Sector 5, Pratap Nagar, Sanganer, Jaipur, Rajasthan 302033
Copyright © 2023, All Rights Reserved. | Zinbal EdTech Pvt. Ltd.