- +91 9024156475
- info@zinbal.com
Showing 1–20 of 29 results
Shaft length: 7 mm
Motor Design: L-Shaped
Shaft Diameter: 5.5 mm
Size: 55 x 48 x 23 mm.
Operating Voltage: 3 to 12V
Current (without loading): 40-180mA
RPM: 150 rpm
Output Torque: 0.8 kg cm.
RPM: 150.
Operating Voltage: 12V DC
Gearbox: Attached Plastic (spur)Gearbox
Shaft diameter: 6mm with internal hole
Torque: 2 kg-cm
No-load current = 60 mA(Max)
Load current = 300 mA(Max).
Shaft length: 7 mm
Shaft Diameter: 5.5 mm
Size: 55 x 48 x 23 mm.
Operating Voltage: 3 to 12V.
Current (without loading): 40-180mA.
RPM: 150 rpm.
Output Torque: 0.8 kg cm.
Specific Uses For Product: Electronic
Power Source: 230v ac
Wattage: 25 Watts
Number of Items: 31
Material: Plastic, Metal
Colour: Clear,Yellow
Recommended Uses For Product: PC,Furniture,Automotive,Appliance,Household,Game Console,Electronic Devices
Special Feature: Ergonomic, Magnetic Tip
RPM: 300.
Operating Voltage: 12V DC
Gearbox: Attached Plastic (spur)Gearbox
Shaft diameter: 6mm with internal hole
Torque: 1 kg-cm
No-load current = 60 mA(Max)
Load current = 300 mA(Max).
1 channel relay board
Operating voltage 5V
Maximum current: 20mA
Relay contact current capacity at AC250V: 10A
Relay contact current capacity DC5V: 10A
Power indicator light
Control Indicator light
Trigger input voltage 3.3V – 5V
Two separate LEDs to indicate relay on/off
Back EMF Protection
Two LEDs to indicate when the relay is on.
Works with logic level signals from 3.3V or 5V devices
Module with diode current protection, short response time
AC control voltage: 250V at max 10A
DC control voltage: 30V at max 10A
Wheel Size: 65mm x 26mm
WEIGHT: 20.00g
The geared DC motor will operate on voltages between 3-9VDC.
Plastic Yellow Rim
Robot Wheel is suitable for all BO motors
Wheel Diameter – 70 mm
Wheel Width – 20 mm
Shaft Diameter – 6 mm
Weight: 33gm
High-temperature capability
Highly efficient for de-soldering purposes
This quality product has exceptional desoldering ability due to strong suction and durable build.
Working voltage: DC 4.8-6V
Provides 3 modes to check servos and ESCs
You can adjust the knob to different speeds and check the response time in manual mode.
In neutral mode, the servo returns to the neutral point.
Automatic "window wiper" mode causes the servo to rotate through the widest possible angle like a window wiper.
Connect up to 3 servos simultaneously
Digital Multimeter with 1M Ohm Impedance is Standard Diagnostic Tool to Measure Two or More Electrical Values Such as Voltage, Current and Resistance. It uses digital and logic technology using integrated circuit technology to offer additional test capabilities.
They are Widely Used in electrical measurements, AC and DC voltage, AC and DC current, and resistance, voltmeter, ammeter, and ohmmeter, voltages and voltage fluctuations in homes or offices.
Colour: Yellow
Style: Wire Collated
Item Weight: 320 Grams
Specific Uses For Product: Art and Craft , DIY Projects, Schools,Industries, For Bonding,Adhesive
Material: EVA, Resin
Compatible Material: Gemstone, Wood, Cardboard, Plastic, Fabric
Item Form: Stick
Supply Voltage: 4.5V to 36V
Output Current: 600mA per channel (continuous)
Number of Channels: 2 H-bridge channels
H-Bridge Configuration: Bidirectional control
Package Type: DIP
Supply Voltage: 5V to 35V
Output Current : 2A per channel (continuous)
Number of Channels : 2 H-bridge channels
H-Bridge Configuration : Bidirectional control
Maximum Power Dissipation : Up to 25W (Tcase = 75°C)
Maximum Frequency : 100kHz
Enable and Status Pins : Available for each channel
Can Measure 200m VDC - 600 VDC
Can measure 200 VAC - 600 VAC
Can measure Resistance from 200 ohm - 2M ohm
Can measure DC current from 200 UA - 10 A
Can be used to measure connectivity with two leads through Indicator buzzer.
Can be used to measure Frequency.
Can measure Diode
Transistor Measurement
Has HOLD button through which you can hold on LCD displays the current measurement value, press thus button again to exit data hold display function
Operating Voltage : 3 ~ 6V
Operating Current: 130 ~ 220mA
Flow Rate : 80 ~ 120 L/H
Maximum Lift : 40 ~ 110 mm
Continuous Working Life : 500 hours
Brand: Quickfix
Weight:-15g
Increases the flow of molten solder, you can easily clean the board.
Suitable for PCB and SMD reworking.
Zinbal EdTech Private Limited
S4, Sector 5, Pratap Nagar, Sanganer, Jaipur, Rajasthan 302033
Copyright © 2023, All Rights Reserved. | Zinbal EdTech Pvt. Ltd.