- +91 9024156475
- info@zinbal.com
Showing 1–20 of 30 results
The operating voltage of this LCD is 4.7V-5.3V
It includes two rows where each row can produce 16-characters.
The utilization of current is 1mA with no backlight
Every character can be built with a 5×8 pixel box
Its display can work on two modes like 4-bit & 8-bit
These are obtainable in Blue & Green Backlight
Specific Uses For Product: Electronic
Power Source: 230v ac
Wattage: 25 Watts
Number of Items: 31
Material: Plastic, Metal
Colour: Clear,Yellow
Recommended Uses For Product: PC,Furniture,Automotive,Appliance,Household,Game Console,Electronic Devices
Special Feature: Ergonomic, Magnetic Tip
Number of Digits 4 digits
Driver Chip TM1637
Communication Interface I2C Bus
Control Pins 2 connections (CLK and DIO)
Supply Voltage Typically 5V DC (Check specific module for voltage range)
Low current operation
Better, brighter and larger display than conventional LCD displays.
Current consumption : 30mA / segment
Peak current : 70mA
Plastic Parts Material ABS
Maximum Voltage(V) 300
Maximum Operating Current (A) 3 – 5
Allowed Wire Size (AWG) 29 ~ 20
Dimensions 170mmx64mm
High-temperature capability
Highly efficient for de-soldering purposes
This quality product has exceptional desoldering ability due to strong suction and durable build.
Digital Multimeter with 1M Ohm Impedance is Standard Diagnostic Tool to Measure Two or More Electrical Values Such as Voltage, Current and Resistance. It uses digital and logic technology using integrated circuit technology to offer additional test capabilities.
They are Widely Used in electrical measurements, AC and DC voltage, AC and DC current, and resistance, voltmeter, ammeter, and ohmmeter, voltages and voltage fluctuations in homes or offices.
This is a single-row 40-pin female header/pin header. You can cut it to your desired size with a wire cutter. The standard pitch for this header is 2.0mm. Technical Specs
Number of Pins: 40
Pin Spacing: 2 mm
Strip Length: 80.60 mm
Strip width: 2.49 mm
Strip Height: 6.8 mm (with contact Points)
These are 40-pin 20cm female-to-female jumper wires. A very flexible and easily detachable cable to the number of wires per your requirements. It has a female connector on each end. It also supports pin headers with a 2.54mm pitch. Technical Specs
Cable Type : Female to Female
Number of Pins: 40
Length : 200mm
Colour: Yellow
Style: Wire Collated
Item Weight: 320 Grams
Specific Uses For Product: Art and Craft , DIY Projects, Schools,Industries, For Bonding,Adhesive
Material: EVA, Resin
Compatible Material: Gemstone, Wood, Cardboard, Plastic, Fabric
Item Form: Stick
This is a single-row 40-pin male header/pin header. You can cut it to your desired size with a wire cutter. The standard pitch for this header is 2.0mm. Technical Specs
Number of Pins: 40
Pin Spacing: 2 mm
Strip Length: 80.60 mm
Strip width: 2.49 mm
Strip Height: 6.8 mm (with contact Points)
These are 40-pin 20cm male-to-female jumper wires. A very flexible and easily detachable cable to the number of wires per your requirements. It has a 1-pin male connector and a 1-pin female connector on each end. It also supports pin headers with a 2.54mm pitch. Technical Specs
Cable Type : Male to Female
Number of Pins: 40
Length : 200mm
These are 40-pin 20cm male-to-male jumper wires. A very flexible and easily detachable cable to the number of wires per your requirements. It has a male connector on each end. It also supports pin headers with a 2.54mm pitch. Technical Specs
Cable Type : Male to Male
Number of Pins: 40
Length : 200mm
Can Measure 200m VDC - 600 VDC
Can measure 200 VAC - 600 VAC
Can measure Resistance from 200 ohm - 2M ohm
Can measure DC current from 200 UA - 10 A
Can be used to measure connectivity with two leads through Indicator buzzer.
Can be used to measure Frequency.
Can measure Diode
Transistor Measurement
Has HOLD button through which you can hold on LCD displays the current measurement value, press thus button again to exit data hold display function
Input Voltage: 3.7 to 5.3 V
Input Current : 320 mA
Driver Chip : MAX7219
Emitted color : Red
Display Dimensions : 32x32x6 (LxWxH) mm
PCB Dimensions : 50×32 (LxW) mm
Plastic Parts Material ABS
Mounting Holes M2
Maximum Operating Current (A) 3 – 5
Allowed Wire Size (AWG) 29 ~ 20
Dimensions 46mmx36mm
Up to 480 Mbps data transfer rate.
USB Type: Type-A to Mini-B.
Exclusively designed for Arduino boards.
Zero PCB is a standard cause revealed circuit board (PCB) called DOT PCB. This is a thin, rigid copper plate with pre-drilled holes at standard intervals on a grid with 2.54 mm (0.1 inch) spacing among holes.
Technical Specs
Dimension: 50 × 75mm
Copper Thickness 1-4 OZ
Board Thickness 0.7-1.2mm
Min. Hole Size 0.3mm
PCB colour: Brown
Zinbal EdTech Private Limited
S4, Sector 5, Pratap Nagar, Sanganer, Jaipur, Rajasthan 302033
Copyright © 2023, All Rights Reserved. | Zinbal EdTech Pvt. Ltd.