- +91 9024156475
- info@zinbal.com
Showing 1–20 of 46 results
The operating voltage of this LCD is 4.7V-5.3V
It includes two rows where each row can produce 16-characters.
The utilization of current is 1mA with no backlight
Every character can be built with a 5×8 pixel box
Its display can work on two modes like 4-bit & 8-bit
These are obtainable in Blue & Green Backlight
Number of Digits 4 digits
Driver Chip TM1637
Communication Interface I2C Bus
Control Pins 2 connections (CLK and DIO)
Supply Voltage Typically 5V DC (Check specific module for voltage range)
Size: 5mm
Color: Blue
Head Shape: Round
Lens Appearance: Transparent
Size: 5mm
Color: Green
Head Shape: Round
Lens Appearance: Transparent
Size: 5mm
Color: Red
Head Shape: Round
Lens Appearance: Transparent
Forward current : 20mA
Peak Forward current : 30mA
Operating Temp. : -25 ~ 75C
Number of pins: 4
Mounting type: Through hole
Size: 5mm
Color: White
Head Shape: Round
Lens Appearance: Transparent
Size: 5mm
Color: Yellow
Head Shape: Round
Lens Appearance: Transparent
Input Voltage(Max.) : 5V
Resistance: 120KΩ to 300MΩ
Body Size : 12 x 9.5mm
Pin Pitch: 6mm
External Material: Plastic;
Color: Black
Low current operation
Better, brighter and larger display than conventional LCD displays.
Current consumption : 30mA / segment
Peak current : 70mA
Output current maximum 1A
Output voltage 5, 9, 12
thermal overload protection
short circuit protection
Protection of the safe operating range of the output transistor
Output current maximum 1A
Output voltage 5, 9, 12
thermal overload protection
short circuit protection
Protection of the safe operating range of the output transistor
Output current maximum 1A
Output voltage 5, 9, 12
thermal overload protection
short circuit protection
Protection of the safe operating range of the output transistor
The range of operating voltage is 3 to 5 V
Output: Both Digital & Analog Signal
The sensitivity of the microphone (1kHz) is 52 to 48 dB
Operate on Low Power
Connection Interface: I2C
operating voltage 2.5 ~ 3.6 V
12 sensing inputs
Auto calibration of each sensor
Operating Voltage: 2.5V-5.5V
Startup Calibration Delay: 0.5 Sec
Current Consumption: < 7 µA
Simple, easy to use, with Auto Calibration
Power: 2.7V to 5.5V
Interface: digital TTL
High-resolution conversion of light intensity to frequency
Programmable color and full-scale output frequency
Communicates directly to microcontroller
Operating Voltage: 3.5V to 5.5V
Operating current: 0.3mA
Output: Serial data
Temperature Range: 0°C to 50°C
Humidity Range: 20% to 90%
Accuracy: ±1°C and ±1%
LM393-based design.
Sensitivity adjustable (potentiometer adjustment).
Operating voltage: 3.3V to 5V DC.
Operating current: 15mA.
Module pin 3 pins.
The output type is digital output (D0).
Size : 2.2inch
Operating voltage : 0-5V
Can operate on LOW voltages
Operating temperature: -45ºC to +80ºC
Flat Resistance: 25K Ω
Resistance Tolerance: ±30%
Zinbal EdTech Private Limited
S4, Sector 5, Pratap Nagar, Sanganer, Jaipur, Rajasthan 302033
Copyright © 2023, All Rights Reserved. | Zinbal EdTech Pvt. Ltd.