- +91 9024156475
- info@zinbal.com
Showing 1–20 of 36 results
1 channel relay board
Operating voltage 5V
Maximum current: 20mA
Relay contact current capacity at AC250V: 10A
Relay contact current capacity DC5V: 10A
Power indicator light
Control Indicator light
Trigger input voltage 3.3V – 5V
Two separate LEDs to indicate relay on/off
Back EMF Protection
Two LEDs to indicate when the relay is on.
Works with logic level signals from 3.3V or 5V devices
Module with diode current protection, short response time
AC control voltage: 250V at max 10A
DC control voltage: 30V at max 10A
The range of operating voltage is 3 to 5 V
Output: Both Digital & Analog Signal
The sensitivity of the microphone (1kHz) is 52 to 48 dB
Operate on Low Power
Connection Interface: I2C
operating voltage 2.5 ~ 3.6 V
12 sensing inputs
Auto calibration of each sensor
Operating Voltage: 2.5V-5.5V
Startup Calibration Delay: 0.5 Sec
Current Consumption: < 7 µA
Simple, easy to use, with Auto Calibration
Power: 2.7V to 5.5V
Interface: digital TTL
High-resolution conversion of light intensity to frequency
Programmable color and full-scale output frequency
Communicates directly to microcontroller
Operating Voltage: 3.5V to 5.5V
Operating current: 0.3mA
Output: Serial data
Temperature Range: 0°C to 50°C
Humidity Range: 20% to 90%
Accuracy: ±1°C and ±1%
LM393-based design.
Sensitivity adjustable (potentiometer adjustment).
Operating voltage: 3.3V to 5V DC.
Operating current: 15mA.
Module pin 3 pins.
The output type is digital output (D0).
Working voltage: DC 4.8-6V
Provides 3 modes to check servos and ESCs
You can adjust the knob to different speeds and check the response time in manual mode.
In neutral mode, the servo returns to the neutral point.
Automatic "window wiper" mode causes the servo to rotate through the widest possible angle like a window wiper.
Connect up to 3 servos simultaneously
Size : 2.2inch
Operating voltage : 0-5V
Can operate on LOW voltages
Operating temperature: -45ºC to +80ºC
Flat Resistance: 25K Ω
Resistance Tolerance: ±30%
Actuation force as low as 0.2N
Sensitivity ranges up to 20N
Cost-effective
Ultra-thin
Operating temperature: -40ºC to +85ºC
None actuated Resistance: 10M Ω
Resistance Range: 100K to 1K Ohms (depending on force)
Optimal Sensing Distance: 3mm
Max. Recommended Sensing Distance: 6mm
Distance between two IR sensors: 15mm
PCB Size ( L x W ) : 126 x 26mm
Input voltage: 4 V to 12 V (+ 5 V recommended)
Output: Digital Signal
Working range: up to 20 cm away
Able to work at low current (20mA)
Directional movements are simply two potentiometers - one for each axis
Compatible with Arduino interface
The biaxial XY Joystick Module KY-023 applies ARDUINO
Dimensions: 1.57 in x 1.02 in x 1.26 in (4.0 cm x 2.6 cm x 3.2 cm)
5 Pin
Power supply: 3.3V or 5.5V
Sensitivity: adjustable
Sensor Type: analog and digital output
Dimensions 34 x 16mm
- The drift car uses a four-wheel drive device as the power system, plus TPR anti-skid wear-resistant tires, making it easy to display 360 rolling drift.
- The car can still keep running when it flip over to its back, free to drive on both sides, running is endless, so is RC fun One-click demonstration: when press the button, the car automatically present all actions including forward/backward/right/left and deformation.
- The car is able to convert and twist automatically from a flat shape to a off-road car with the button on controller, then the car body will be bowing and four wheels grab the ground more tightly and steadily. Racing or climbing, just your choice.
- Kids can either drive this monster truck low and steady for smooth surfaces or raise the chassis to deal with all kinds of obstacles/ terrain. With just the press of the function button, the stunt car will automatically convert.
High quality off-road vehicle quality High quality professional off-road anti-vibration system, high imitation rubber tire with an irregular concave surface, can provide firm grip; bottom with direction rotator, can automatically adjust the car without going straight, whether it is land, Beaches, meadows, or rugged rocky mountain roads.
Four-wheel drive, twin-engine power 4WD and four-wheel motor drive install independent suspension springs to make the off-road body more flexible, play a shock-proof function, cushion the impact force transmitted by the uneven road to the frame or the body, and attenuate the resulting shock.
Long-distance remote control and large-capacity battery Long-distance remote control and large-capacity battery: remote control over 80 meters, 2.4Ghz can support multiple cars at the same time; equipped with 4.8V 700mAh rechargeable battery; charging time is about 2 hours, can provide 15-20 minutes of driving time.
Full-featured remote control Forward/backward/left/right.The remote control supports multiple simultaneous plays, and does not interfere with each other, the powerful stunts on the skateboard and pedal. Remote control off-road racing and drifting.
Operating Voltage: 5 Volt
Preheat Duration:20 s
Output: Both digital and analog
The Sensitivity of Digital pin can be varied using the potentiometer
Operating Voltage: 5 Volt
Preheat Duration:20 s
Output: Both digital and analog
The Sensitivity of Digital pin can be varied using the potentiometer
Operating Voltage: 5 Volt
Preheat Duration:20 s
Output: Both digital and analog
The Sensitivity of Digital pin can be varied using the potentiometer
Zinbal EdTech Private Limited
S4, Sector 5, Pratap Nagar, Sanganer, Jaipur, Rajasthan 302033
Copyright © 2023, All Rights Reserved. | Zinbal EdTech Pvt. Ltd.