- +91 9024156475
- info@zinbal.com
Showing 1–20 of 45 results
Shaft length: 7 mm
Motor Design: L-Shaped
Shaft Diameter: 5.5 mm
Size: 55 x 48 x 23 mm.
Operating Voltage: 3 to 12V
Current (without loading): 40-180mA
RPM: 150 rpm
Output Torque: 0.8 kg cm.
RPM: 150.
Operating Voltage: 12V DC
Gearbox: Attached Plastic (spur)Gearbox
Shaft diameter: 6mm with internal hole
Torque: 2 kg-cm
No-load current = 60 mA(Max)
Load current = 300 mA(Max).
Shaft length: 7 mm
Shaft Diameter: 5.5 mm
Size: 55 x 48 x 23 mm.
Operating Voltage: 3 to 12V.
Current (without loading): 40-180mA.
RPM: 150 rpm.
Output Torque: 0.8 kg cm.
The operating voltage of this LCD is 4.7V-5.3V
It includes two rows where each row can produce 16-characters.
The utilization of current is 1mA with no backlight
Every character can be built with a 5×8 pixel box
Its display can work on two modes like 4-bit & 8-bit
These are obtainable in Blue & Green Backlight
RPM: 300.
Operating Voltage: 12V DC
Gearbox: Attached Plastic (spur)Gearbox
Shaft diameter: 6mm with internal hole
Torque: 1 kg-cm
No-load current = 60 mA(Max)
Load current = 300 mA(Max).
Number of Digits 4 digits
Driver Chip TM1637
Communication Interface I2C Bus
Control Pins 2 connections (CLK and DIO)
Supply Voltage Typically 5V DC (Check specific module for voltage range)
Low current operation
Better, brighter and larger display than conventional LCD displays.
Current consumption : 30mA / segment
Peak current : 70mA
The range of operating voltage is 3 to 5 V
Output: Both Digital & Analog Signal
The sensitivity of the microphone (1kHz) is 52 to 48 dB
Wheel Size: 65mm x 26mm
WEIGHT: 20.00g
The geared DC motor will operate on voltages between 3-9VDC.
Plastic Yellow Rim
Robot Wheel is suitable for all BO motors
Operate on Low Power
Connection Interface: I2C
operating voltage 2.5 ~ 3.6 V
12 sensing inputs
Auto calibration of each sensor
Operating Voltage: 2.5V-5.5V
Startup Calibration Delay: 0.5 Sec
Current Consumption: < 7 µA
Simple, easy to use, with Auto Calibration
Power: 2.7V to 5.5V
Interface: digital TTL
High-resolution conversion of light intensity to frequency
Programmable color and full-scale output frequency
Communicates directly to microcontroller
Wheel Diameter – 70 mm
Wheel Width – 20 mm
Shaft Diameter – 6 mm
Weight: 33gm
Operating Voltage: 3.5V to 5.5V
Operating current: 0.3mA
Output: Serial data
Temperature Range: 0°C to 50°C
Humidity Range: 20% to 90%
Accuracy: ±1°C and ±1%
LM393-based design.
Sensitivity adjustable (potentiometer adjustment).
Operating voltage: 3.3V to 5V DC.
Operating current: 15mA.
Module pin 3 pins.
The output type is digital output (D0).
Size : 2.2inch
Operating voltage : 0-5V
Can operate on LOW voltages
Operating temperature: -45ºC to +80ºC
Flat Resistance: 25K Ω
Resistance Tolerance: ±30%
Actuation force as low as 0.2N
Sensitivity ranges up to 20N
Cost-effective
Ultra-thin
Operating temperature: -40ºC to +85ºC
None actuated Resistance: 10M Ω
Resistance Range: 100K to 1K Ohms (depending on force)
Optimal Sensing Distance: 3mm
Max. Recommended Sensing Distance: 6mm
Distance between two IR sensors: 15mm
PCB Size ( L x W ) : 126 x 26mm
Input voltage: 4 V to 12 V (+ 5 V recommended)
Output: Digital Signal
Working range: up to 20 cm away
Able to work at low current (20mA)
Directional movements are simply two potentiometers - one for each axis
Compatible with Arduino interface
The biaxial XY Joystick Module KY-023 applies ARDUINO
Dimensions: 1.57 in x 1.02 in x 1.26 in (4.0 cm x 2.6 cm x 3.2 cm)
5 Pin
Zinbal EdTech Private Limited
S4, Sector 5, Pratap Nagar, Sanganer, Jaipur, Rajasthan 302033
Copyright © 2023, All Rights Reserved. | Zinbal EdTech Pvt. Ltd.